Figure 2-103 Low Position Setting; Figure 2-104 Cabling Of Dss; Installing The Dss Console - NEC SL2100 Hardware Manual

SL2100

5.3 Installing the DSS Console

The 60D DSS-A1 Console can be installed on the last hybrid extension ports (ST8/ST16/ST24/ST40/
ST48/ST56/ST72/ST80/ST88) of each 308U-A1/008U-C1 board directly. The 60D DSS-B1 Console
can be installed on any digital extension port of each 082U-B1 board directly. The pair extension for
the DSS Console is assigned using system programming.
For the settings, refer to the SL2100 Features & Specifications Manual.
5.3.1 DSS Console Leg Adjustment
The DSS Console provides the leg for angling the console to best suit each user. The leg can be set
for two different heights (Low/High).
5.3.1.1 Low Position Setting
1. Turn DSS Console over (button side down).
2. Adjust the legs to desired height.
3. Lead the Line cord through the applicable grooves.
5.3.1.2 High position setting
1. Turn DSS Console over (button side down).
2-76
Leg

Figure 2-103 Low Position Setting

Figure 2-104 Cabling of DSS

ISSUE 1.0
< Low position >
Installation