Removal And Replacement Of The Bs( )-L Kit (Ten Key Kit); Remove The Bs( )-L Kit; Figure 5-59 Remove Plastic Panels - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
4.8
5-64

Removal and Replacement of the BS( )-L Kit (Ten Key Kit)

The Business BS( )-L Kit (in black or white), is commonly delivered with the
UNIVERGE SV9100 multiline terminal. If required, the BS( )-L Kit can be
removed and replaced on the DT300/DT700 Series multiline terminal.
The Retro BS( )-L Kit is an optional kit available to be used with the IPK II and IPS
terminals.
4.8.1

Remove the BS( )-L Kit

1. Pry the right side panel from the multiline terminal (refer to
5-59 Remove Plastic

Figure 5-59 Remove Plastic Panels

Line Key
Panel
Numbered
Keypad
Panel
2. Remove the Numbered Keypad panel. (Refer to paragraph
5-60 Remove the Ten Key Kit on page
Panels).
5-65.)
Installing DT Series Digital and IP Multiline Terminals
Figure
Desi Printer
Sheet
Side Panel
Figure