Led Indications; Connectors; Table 4-33 Gcd-4Odtb Led Indications; Table 4-34 Gcd-4Odtb Rj-61 Cable Connector Pin-Outs - NEC Univerge SV9100 System Hardware Manual

Table 4-33 GCD-4ODTB LED Indications

LED Indication
Live LED
Busy LED (Red)
(Green)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash 80ms (On/
Off) x 3/400ms
Off
4-76
5.7.3

LED Indications

LED indications for the GCD-4ODTB are listed in
LED Indications. Each LED is listed with its associated function and LED
and Operational status.
Refer to Figure 4-27 GCD-4ODTB Blade on page 4-74
the LEDs on the blade.
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
5.7.4

Connectors

Table 4-34 GCD-4ODTB RJ-61 Cable Connector Pin-Outs on page 4-77
shows the pin-outs for the RJ-61 connector.
Blade on page 4-74
–
When you exceed the system
capacity.
When the main software version is
not matched.
–
–
–
–
–
–
Figure 4-27 GCD-4ODTB
shows the location of the connectors on the ODT blade.
Issue 2.0
Table 4-33 GCD-4ODTB
for the location of
Remarks
Installing the SV9100 Blades