Figure 5-98 Secure Bracket To Multiline Terminal With Screws; Figure 5-99 Press Serial Cable Into Groove - NEC Univerge SV9100 System Hardware Manual
Hide thumbs
Also See for Univerge SV9100:
- Features and specifications (1403 pages) ,
- Programming manual (954 pages) ,
- Manual (766 pages)
Table of Contents
Advertisement
Issue 2.0
SV9100 System Hardware Manual
6.
Attach the bracket with three supplied screws.
Figure 5-98 Secure Bracket to Multiline Terminal with Screws
7.
Carefully push the Serial cable into the Serial Cable Groove
(DT700/DT800 only).
8.
Using the guides, slide the DCL-60-1/DCZ-60-2 CONSOLE
onto the installed bracket (refer to
Cable into
Figure 5-99 Press Serial Cable into Groove
Figure 5-99 Press Serial
Groove).
Screws
5-93
Advertisement
Table of Contents
