Figure 3-87 Install Rubber Feet For Multiple Chassis; Figure 3-88 Install Metal Brackets With Screws; Multiple Chs2Ug Chassis Installation - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

SV9100 System Hardware Manual

Expansion chassis can be secured to the CHS BASE UNIT and require an

additional CHS2UG JOINT BRACKET KIT per chassis.

Install the five rubber feet to the bottom of each chassis.

Figure 3-87 Install Rubber Feet for Multiple Chassis

Using supplied screws in the CHS2UG JOINT BRACKET KIT, attach

metal brackets to both ends of the 19" chassis and the CHS BASE

UNIT. Refer to

Figure 3-88 Install Metal Brackets with