11.2.1 Conditions; Figure 7-20 In-Line Power Adapter - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
SV9100 System Hardware Manual
Router Blade (spare pair detection)

Cisco Data Switch – CDP supported (in-line and spare pair detection)

In-Line Power Adapter


Figure 7-20 In-Line Power Adapter

11.2.1 Conditions

Only IP telephones supported by center feed can be used.

This adapter cannot be used with the H.323 telephones.

When center feed is used, unplug the adapter from the

Ethernet switch before changing the SW1 setting on the back
of the adapter.
The ILPA-R adapter is intended for use with IP phones and IP

Adapters. Installing any other device into the telephone port of
the ILPA-R may result in damage to the device.
When powering an IP phone using an ILPA-R adapter, the phone

should not be connected to a port on the Router Blade.
7-27