Selecting A Location; Table 6-2 Bch Charging Leds - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
2.2
SV9100 System Hardware Manual
When charging the BCH, the following LEDs provide indications of the status:

Table 6-2 BCH Charging LEDs

On-Hook Charging:
Off-Hook (Idle):
The BCH retains call histories for up to 10 outgoing and 10 incoming calls. For
outgoing calls, this includes completed and uncompleted calls. For incoming calls,
this includes both answered and unanswered calls. The call history provides the
date, time and telephone number for each call. When the limit is exceeded, the
oldest call is deleted and replaced with the newest call.

Selecting a Location

Before choosing a location for your new telephone, consider these important
guidelines:
If multiple cordless terminals are installed, keep their Bluetooth cradles at least

3.3 feet (1 meter) apart.
If the Bluetooth cradle is installed near a metal, concrete wall or any other

structure that could affect radio transmission, a communication failure might
occur.
Keep the Bluetooth cradle at least 9.8 feet (3 meters) away from any device

listed below. Also be careful not to get within 9.8 feet (3 meters) of these
devices when using the Bluetooth handset.
Microwave ovens

Wireless LAN access points (AP)

Medical apparatus

RFID (apparatus operating in the 2.4GHz band)

Manufacturing equipment, such as plasma strippers (LSI manufacturing)

Speedway electronic toll gates

Bluetooth devices

Red = Charging Green = Charging Complete
No LED = Idle Flashing Red = Incoming Call
6-3