Led Indications; Connectors; Table 4-21 Gcd-4Cot( ) Led Indications; Table 4-22 Gcd-4Cot( ) Rj-61 Cable Connector Pin-Outs - NEC Univerge SV9100 System Hardware Manual

Issue 2.0

Table 4-21 GCD-4COT( ) LED Indications

LED Indication
Live LED
Busy LED (Red)
(Green)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash 80ms (On/
Off) x 3/400ms
Off
SV9100 System Hardware Manual
5.1.3

LED Indications

LED indications for the GCD-4COT( ) are listed in
LED Indications. Each LED is listed with its associated function and LED
and Operational status.
Refer to Figure 4-19 GCD-4COT( ) Blade on page 4-51
the LEDs on the blades.
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
5.1.4

Connectors

Table 4-22 GCD-4COT( ) RJ-61 Cable Connector Pin-Outs on page 4-54
shows the pin-outs for the RJ-61 connector. Refer to
4COT( ) Blade on page 4-51
connectors on the GCD-4COT( ) blades.
Table 4-21 GCD-4COT( )
Remarks
–
When you exceed the system
capacity.
When the main software version is
not matched.
–
–
–
–
–
–
Figure 4-19 GCD-
for an illustration showing the location of the
for the location of
4-53