ISSUE 1.0
SL2100
IP7WW-1PRIDB-C1
J5
PRI 1
Figure 2-73 Switches Location of 1PRIDB-C1
3.4.9 LED Indication
A Status LED is available only for the base board (308U, 082U, 008U, 000U) and the daughter board
(3COIDB, 2BRIDB, 1PRIDB) does not have the status LED, therefore a Status LED on base board is
used in common about LED indication related to the daughter board.
082U-B1
ESI
SLI
RL/Audio
1-4
5-8
1-2
Trunks
(The illustration shows IP7WW-082U-B1.)
Status LED (Green)
Figure 2-74 Location of Status LED
The order of priority (No.1 ~ 8) is set up to each status and when more than one different status are
occurred, the highest priority LED indication pattern (status) will be indicated. Refer to
Table 2-23 PRI/BRI LED Indications on page
2-58.
Hardware Manual
2-57