Description; Led Indicators; Switches; Section 1 Description - NEC ElectraElite IPK II Installation Manual

Document Revision 1A
___________________________________________________________________________________
2.1
DS1
DS2
DS3
DS4
DS5
DS6
DS7
DS8
DS9
DS10
LED 3 (DS13)
LED 2 (DS12)
LED 1 (DS11)
2.2
___________________________________________________________________________________
1 - 4

LED Indicators

The LEDs are described in
Table 1-1
LED

Description

Channel Status
Channel Status
Channel Status
Channel Status
Channel Status
Channel Status
Channel Status
Channel Status
LIVE
CF BUSY
Conference Status
(Back of ETU)
Insertion Status
(Back of ETU)
Boot Status
(Back of ETU)

Switches

The CNF(16)-U20 ETU has the following switches.
H DIP switch SW1
Refer to
1-5. This switch has four selector switches:
SW1-1 Restores ETU Port and /Modes settings to
J
SW1-2 Defines either Simple or Advanced Mode
J
SW1-3 Defines the 16 Port configuration
J
SW1-4 Defines the 8 Port configuration
J
Table 1-1 CNF(16)-U20 ETU LED
CNF(16)-U20 ETU
LED
On
CH8/CH16 On
CH7/CH15 On
CH6/CH14 On
CH5/CH13 On
CH4/CH12 On
CH3/CH11 On
CH2/CH10 On
CH1/CH9 On
ETU Active
Flash Access
Conference Initialized
Insertion Complete
Boot Complete
Table 1-2 CNF(16)-U20 ETU Dip Switch SW1 on page
Factory Default
Electra Elite IPK II
Indications.
Indications
Off
CH8/CH16 Off
CH7/CH15 Off
CH6/CH14 Off
CH5/CH13 Off
CH4/CH12 Off
CH3/CH11 Off
CH2/CH10 Off
CH1/CH9 Off
ETU Inactive
No Flash Access
Conference not
Initialized
Insertion not
Complete
Boot Incomplete
CNF(16)-U20 ETU