At+Cmee Report Mobile Equipment Error - SimCom SIM7000 Series At Command Manual

<mode>
<passwd>
facility from the MT user interface or with command Change Password
+CPWD)
<class>
may refer only to some bearer service if TA does not support values 16,
32, 64 and 128)
<status>
1 Active
Parameter Saving NO_SAVE
Mode
Max Response 15s
Time
Reference Note

3GPP TS 27.007
[14]
3.2.8

AT+CMEE Report Mobile Equipment Error

AT+CMEE Report Mobile Equipment Error
Test Command Response
+CMEE: (list of supported <n>s)
AT+CMEE=?
OK
Parameters
See Write Command
SIM7000 Series_AT Command Manual_V1.03
"SC" SIM (lock SIM/UICC card) (SIM/UICC asks password
in MT power-up and when this lock command issued) Correspond
to PIN1 code.
"FD" SIM card or active application in the UICC (GSM or
USIM) fixed dialling memory feature (if PIN2 authentication has not
been done during the current session, PIN2 is required as <passwd>)
"PN" Network Personalization, Correspond to NCK code
"PU" Network subset Personalization Correspond to NSCK
code
"PP" Service Provider Personalization Correspond to SPCK
code
0 unlock
1 lock
2 query status
String type (Shall be the same as password specified for the
1-255
1 Voice (telephony)
2 Data refers to all bearer services; with <mode>=2 this
4 Fax (facsimile services)
7 All classes
0 Not active
CME errors if SIM not inserted or PIN is not entered.
Smart Machine Smart Decision
42 2018-05-08