At+Ftpextput Extend Upload File - SimCom SIM7000 Series At Command Manual

Parameters
<state>
and FTPSIZE operation.
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note

11.2.19 AT+FTPEXTPUT Extend Upload File

AT+FTPEXTPUT Extend Upload File
Test Command Response
AT+FTPEXTPUT OK
=?
Write Command Response
If mode is 0 or 1
AT+FTPEXTPUT
=<mode>[,<pos>,< OK
len>,<timeout>]
If mode is 2
+FTPEXTPUT: <address>,<len>
......
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<mode>
<pos>
<len>
<timeout> timeout value of serial port. 1000ms-1000000ms
<file name> File name length should less or equal 50 characters.
<err>
Parameter Saving NO_SAVE
Mode
Max Response 75 seconds(In case no response is received from server)
Time
SIM7000 Series_AT Command Manual_V1.03
0 Idle
1 In the FTP session, including FTPGET, FTPPUT, FTPDELE
//Input data
0 use default FTPPUT method
1 use extend FTPPUT method
2 send data to RAM through serial port, then FTPPUT
method will get the data from RAM.
data offset address 0-300k
data length 0-300k
See "AT+FTPGET"
Smart Machine Smart Decision
180 2018-05-08