At+Cfun Set Phone Functionality - SimCom SIM7000 Series At Command Manual

3GPP TS 27.007
[13]

3.2.19 AT+CFUN Set Phone Functionality

AT+CFUN Set Phone Functionality
Test Command Response
AT+CFUN=? +CFUN: (list of supported <fun>s),(list of supported <rst>s)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command
Read Command Response
AT+CFUN? +CFUN: <fun>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command
Write Command Response
AT+CFUN=<fun OK
>[,<rst>] If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<fun>
<rst>
Parameter Saving -
Mode
Max Response 10s
Time
Reference Note
SIM7000 Series_AT Command Manual_V1.03
0 Minimum functionality
1 Full functionality (Default)
4 Disable phone both transmit and receive RF circuits.
5 Factory Test Mode
6 Reset
7 Offline Mode
0 Do not Reset the MT before setting it to <fun> power level.
1
Reset the MT before setting it to <fun> power level.
Smart Machine Smart Decision
54 2018-05-08