At+Cnmi New Sms Message Indications - SimCom SIM7000 Series At Command Manual

in integer format (when first character of <da> is + (IRA 43) default is 145,
otherwise default is 129)
<mr>
Parameter Saving NO_SAVE
Mode
Max Response 60s
Time
Reference Note
3GPP TS 27.005
4.2.8

AT+CNMI New SMS Message Indications

AT+CNMI New SMS Message Indications
Test Command Response
AT+CNMI=? +CNMI: (list of supported <mode>s),(list of supported <mt>s),(list of
supported <bm>s),(list of supported <ds>s),(list of supported <bfr>s)
OK
Parameters
See Write Command
Read Command Response
AT+CNMI? +CNMI: <mode>,<mt>,<bm>,<ds>,<bfr>
OK
Parameters
See Write Command
Write Command Response
AT+CNMI=<mo TA selects the procedure for how the receiving of new messages from the
de>[,<mt>[,<bm network is indicated to the TE when TE is active, e.g. DTR signal is ON. If
>[,<ds>[,<bfr>]]] TE is inactive (e.g. DTR signal is OFF), message receiving should be done
] as specified in GSM 03.38.
OK
ERROR
Parameters
<mode>
code buffer is full, indications can be buffered in some other place or the
oldest indications may be discarded and replaced with the new received
indications.
unsolicited result codes when TA-TE link is reserved (e.g. in on-line data
mode). Otherwise forward them directly to the TE.
SIM7000 Series_AT Command Manual_V1.03
GSM 03.40 TP-Message-Reference in integer format
0 Buffer unsolicited result codes in the TA. If TA result
1 Discard indication and reject new received message
2 Buffer unsolicited result codes in the TA when TA-TE
71
Smart Machine Smart Decision
2018-05-08