At+Cipudpmode Udp Extended Mode - SimCom SIM7000 Series At Command Manual

?
OK
Parameters
See Write Command
Write Command Response
AT+CIPSHOWTP OK
=<mode> ERROR
Parameters
<mode>
transfer protocol in IP header to received data or not
Parameter Saving NO_SAVE
Mode
Max Response Time -
Reference Note



8.2.26 AT+CIPUDPMODE UDP Extended Mode

AT+CIPUDPMODE UDP Extended Mode
Test Command Response
1) For single IP connection (+CIPMUX=0)
AT+CIPUDPMOD
E=? +CIPUDPMODE: (0-2),("(0-255).(0-255).(0-255).(0-255)"),(1-65535)
OK
2) For multi IP connection (+CIPMUX=1)
+CIPUDPMODE:
(0-5),(0-2),("(0-255).(0-255).(0-255).(0-255)"),(1-65535)
OK
Parameters
See Write Command
Read Command Response
AT+CIPUDPMOD 1) For single IP connection (+CIPMUX=0)
E? +CIPUDPMODE: <mode>[,<IP address>,<Port>]
OK
2) For multi IP connection (+CIPMUX=1)
SIM7000 Series_AT Command Manual_V1.03
A numeric parameter which indicates whether to display
0 Not display transfer protocol
1 Display transfer protocol, the format is "+IPD,
<data size>,<TCP/UDP>:<data>"
This command will be effective only in single connection mode
(+CIPMUX=0).
Only when +CIPHEAD is set to 1, the setting of this command will
work.
Smart Machine Smart Decision
144 2018-05-08