At+Cassl Set Protocol And Ssl Context Identifier - SimCom SIM7000 Series At Command Manual

Max Response -
Time
Reference Note

18.2.2 AT+CASSL Set protocol and SSL context identifier

AT+CASSL Set protocol and SSL context identifier
Test Command Response
AT+CASSL=? +CASSL: (range of supported <cid>s),0,(0-1)
+CASSL: (range of supported <cid>s),1,(0-5)
OK
Parameters
See Write Command
Read Command Response
If <cid> has been set by AT+CACID and <sslFlag> is 0:
AT+CASSL?
+CASSL: <cid>,<sslFlag>,<protocol>
OK
If <cid> has been set by AT+CACID and <sslFlag> is 1:
+CASSL: <cid>,<sslFlag>,<ctxindex>
OK
If no <cid> has been set by AT+CACID:
OK
Parameter
See Write Command
Write Command Response
1)If <sslFlag> is 0:
OK
If error is related to ME functionality:
AT+CASSL=<cid>
,<sslFlag>,<protoc +CME ERROR: <err>
ol>
Parameters
<cid>
2)If <sslFlag> is 1:
<sslFlag> Interger
AT+CASSL=<cid>
,<sslFlag>,<ctxind
ex>
<protocol> Interger
<ctxindex> The identifier of SSL configurations, see AT+CSSLCFG.
Parameter Saving NO_SAVE
Mode
SIM7000 Series_AT Command Manual_V1.03
TCP/UDP identifier, interger.
0 Not support SSL
1 Support SSL
0 TCP
1 UDP
230
Smart Machine Smart Decision
2018-05-08