At+Csclk Configure Slow Clock; At+Ccid Show Iccid - SimCom SIM7000 Series At Command Manual

Time
Reference
5.2.8

AT+CSCLK Configure Slow Clock

AT+CSCLK Configure Slow Clock
Test Command Response
AT+CSCLK=? +CSCLK: (list of supported <n>s)
OK
Parameter
See Write Command
Read Command Response
AT+CSCLK? +CSCLK: <n>
OK
Parameter
See Write Command
Write Command Response
AT+CSCLK=<n OK
> ERROR
Parameter
<n>
Parameter Saving AUTO_SAVE
Mode
Max Response -
Time
Reference Note
5.2.9

AT+CCID Show ICCID

AT+CCID Show ICCID
Test Command Response
AT+CCID=? OK
SIM7000 Series_AT Command Manual_V1.03
0 Disable slow clock, module will not enter sleep mode.
1 Enable slow clock, it is controlled by DTR. When DTR is
high, module can enter sleep mode. When DTR changes to low
level, module can quit sleep mode.
88
Smart Machine Smart Decision
2018-05-08