At+Ftpmkd Make Directory On The Remote Machine; At+Ftprmd Remove Directory On The Remote Machine - SimCom SIM7000 Series At Command Manual

Reference Note

11.2.20 AT+FTPMKD Make Directory on the Remote Machine

AT+FTPMKD Make Directory on the Remote Machine
Test Command Response
AT+FTPMKD=? OK
Execution Response
Command If success:
AT+FTPMKD OK
+FTPMKD: 1,0
If failed:
OK
+FTPMKD: 1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<error>
Parameter Saving NO_SAVE
Mode
Max Response 75 seconds(In case no response is received from server)
Time
Reference Note
The created folder is specified by the "AT+FTPGETPATH" command.

11.2.21 AT+FTPRMD Remove Directory on the Remote Machine

AT+FTPRMD Remove Directory on the Remote Machine
Test Command Response
AT+FTPRMD=? OK
Execution Response
Command If success:
AT+FTPRMD OK
SIM7000 Series_AT Command Manual_V1.03
 When extend FTPPUT mode is activated, input data then execute
"AT+FTPPUT=1" to transmit, after session is complete, if
successful, it returns "+FTPPUT: 1,0", otherwise it returns
"+FTPPUT: 1,<error>", <error> see "AT+FTPGET".
See "AT+FTPGET"
Smart Machine Smart Decision
181 2018-05-08