At+Cmee Report Mobile Equipment Error; At+Colp Connected Line Identification Presentation - SimCom SIM5300E At Command Manual

Reference
3.2.20

AT+CMEE Report Mobile Equipment Error

AT+CMEE Report Mobile Equipment Error
Test Command
AT+CMEE=?
Read Command
AT+CMEE?
Write Command
AT+CMEE=[<n>]
Parameters
Reference
3GPP TS 27.007 [13]
3.2.21

AT+COLP Connected Line Identification Presentation

AT+COLP Connected Line Identification Presentation
SIM5300E AT Command Manual V1.02
2 Unknown (e.g. no network, etc.)
3 CLIR temporary mode presentation restricted
4 CLIR temporary mode presentation allowed
Response
+CMEE: (list of supported <n>s)
OK
Response
+CMEE: <n>
OK
Response
TA disables or enables the use of result code +CME ERROR: <err> as an
indication of an error relating to the functionality of the ME.
OK
If error is related to ME functionality:
+CME ERROR:<err>
<n>
0 Disable +CME ERROR: <err> result code and use ERROR
instead.
1 Enable +CME ERROR: <err> result code and use numeric <err>
2 Enable +CME ERROR: <err> result code and use verbose <err>
values
41