At+Cmee Report Mobile Equipment Error - SimCom SIM5350 Command Set

SIM5350 AT Command Set
Defined values
<rssi>
0 113 dBm or less
1 111 dBm
2...30 109... 53 dBm
31 51 dBm or greater
99 not known or not detectable
<ber>
(in percent)
0...7 as RXQUAL values in the table in TS 45.008 [20] subclause 8.2.4 not known or not
detectable
Examples
AT+CSQ
+CSQ: 22,0
OK
6.5

AT+CMEE Report mobile equipment error

Description
This command is used to disable or enable the use of result code "+CME ERROR: <err>" or
"+CMS ERROR: <err>" as an indication of an error relating to the functionality of ME; when
enabled, the format of
SIM PIN References
NO 3GPP TS 27.007
Syntax
Test Command
AT+CMEE=?
Read Command
AT+CMEE?
Write Command
AT+CMEE=<n>
SIM5350_ATC_V1.02
ERROR
<err> can be set to numeric or verbose string.
Responses
+CMEE: (list of supported <n>s)
OK
Responses
+CMEE: <n>
OK
Responses
OK
ERROR
62
6/9/2014