At+Cstt Start Task And Set Apn, User Name, Password - SimCom SIM7000 Series At Command Manual

Parameters
See Write Command
Read Command Response
AT+CLPORT? 1) For single IP connection (+CIPMUX=0)
+CLPORT: <TCP port>,<UDP port>
OK
2) For multi IP connection (+CIPMUX=1)
+CLPORT: 0,<TCP port>,<UDP port>
+CLPORT: 1,<TCP port>,<UDP port>
+CLPORT: 2,<TCP port>,<UDP port>
+CLPORT: 3,<TCP port>,<UDP port>
+CLPORT: 4,<TCP port>,<UDP port>
+CLPORT: 5,<TCP port>,<UDP port>
+CLPORT: 6,<TCP port>,<UDP port>
+CLPORT: 7,<TCP port>,<UDP port>
OK
Parameters
See Write Command
Write Command Response
1) For single IP
OK
connection
ERROR
(+CIPMUX=0)
Parameters
AT+CLPORT=<
<n>
mode>,<port>
number this used in multi IP connection
2) For multi IP
<mode>
connection
(+CIPMUX=1)
AT+CLPORT=<
<port>
n>,<mode>,<por
t>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
This command will be effective when module is set as a Client.
8.2.9

AT+CSTT Start Task and Set APN, USER NAME, PASSWORD

AT+CSTT Start Task and Set APN, USER NAME, PASSWORD
Test Command Response
SIM7000 Series_AT Command Manual_V1.03
0..7 A numeric parameter which indicates the connection
A string parameter which indicates the connection type
"TCP" TCP local port
"UDP" UDP local port
0-65535 A numeric parameter which indicates the local port.
Default value is 0, a port can be dynamically allocated a port.
130
Smart Machine Smart Decision
2018-05-08