At+Cres Restore Sms Settings - SimCom SIM7000 Series At Command Manual

<mem3>,<used3>,<total3>
OK
ERROR
Parameters
See Write Command
Write Command Response
AT+CPMS=<me TA selects memory storages <mem1>,<mem2> and <mem3> to be used for
m1>[,<mem2>[,< reading, writing, etc.
mem3>]] +CPMS: <used1>,<total1>,<used2>,<total2>,<used3>,<total3>
OK
ERROR
Parameters
<mem1>
<mem2>
<mem3>
routing to PC is not set ("+CNMI")
<usedx>
<totalx>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
3GPP TS 27.005

4.2.10 AT+CRES Restore SMS Settings

AT+CRES Restore SMS Settings
Test Command Response
AT+CRES=? +CRES: list of supported <profile>s
OK
Parameter
See Write Command
Write Command Response
AT+CRES=<pro Execution command restores message service settings from non-volatile
file> memory to active memory. A TA can contain several profiles of settings.
Settings specified in commands Service Centre Address +CSCA and Set
SIM7000 Series_AT Command Manual_V1.03
Messages to be read and deleted from this memory storage
"SM" SIM message storage
Messages will be written and sent to this memory storage
"SM" SIM message storage
Received messages will be placed in this memory storage if
"SM" SIM message storage
Integer type; Number of messages currently in <memx>
Integer type; Number of messages storable in <memx>
74
Smart Machine Smart Decision
2018-05-08