At+Cfsdfile Delete The File From The Flash - SimCom SIM7000 Series At Command Manual

Test Command Response
AT+CFSRFILE=? +CFSRFILE: (0-3),"fileName",(0-1),(1-10240),(0-filesize)
OK
Parameters
See Write Command
Write Command Response
AT+CFSRFILE=< OK
or
index>,<file
name>,<mode>,<fi ERROR
or
le size>,<position>
+CME ERROR: <err>
Parameters
<index>
<file name>
<mode>
<file size>
<position>
When <write mode>=0, <position> is invalid. Read data from the
beginning to the end of the file.
When <write mode>=1, <position> is valid. Read data from the <position>
to the end of the file.
Parameter Saving -
Mode
Max Response -
Time
Reference Note

16.2.4 AT+CFSDFILE Delete the File from the Flash

AT+CFSDFILE Delete the File from the Flash
SIM7000 Series_AT Command Manual_V1.03
Directory of AP filesystem:
0 "/custapp/"
1 "/fota/"
2 "/datatx/"
3 "/customer/"
File name length should be less than or equal to 50 characters,
0 Read data at the beginning of the file .
1 Read data at the <position> of the file .
The size of the file that you want to read should be less than 10240.
The starting position that will be read in the file.
218
Smart Machine Smart Decision
2018-05-08