At+Cifsr Get Local Ip Address; At+Cifsrex Get Local Ip Address Extend - SimCom SIM7000 Series At Command Manual

Mode
Max Response 85 seconds
Time
Reference Note



8.2.11 AT+CIFSR Get Local IP Address

AT+CIFSR Get Local IP Address
Test Command Response
AT+CIFSR=? OK
Execution Response
Command <IP address>
AT+CIFSR ERROR
Parameter
<IP address> A string parameter which indicates the IP address assigned
from GPRS
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
Only after PDP context is activated, local IP address can be obtained by
AT+CIFSR, otherwise it will respond ERROR. To see the status use
AT+CIPSTATUS command. Status should be:
IP GPRSACT, TCP CONNECTING, UDP CONNECTING, SERVER
LISTENING, IP STATUS, CONNECT OK, TCP CLOSING, UDP
CLOSING, TCP CLOSED, UDP CLOSED in single-connection mode (see
<state> parameter);
IP STATUS, IP PROCESSING in multi-connection mode (see <state>
parameter).

8.2.12 AT+CIFSREX Get Local IP Address extend

AT+CIFSREX Get Local IP Address extend
Test Command Response
AT+CIFSREX=? OK
Execution Response
SIM7000 Series_AT Command Manual_V1.03
AT+CIICR only activates moving scene at the status of IP START,
after operating this Command is executed, the state will be changed to
IP CONFIG.
After module accepts the activated operation, if it is activated
successfully, module state will be changed to IP GPRSACT, and it
responds OK, otherwise it will respond ERROR.
Smart Machine Smart Decision
132 2018-05-08