At+Cipdpdp Set Whether To Check State Of Gprs Network Timing - SimCom SIM7000 Series At Command Manual

Max Response -
Time
Reference

8.2.22 AT+CIPDPDP Set Whether to Check State of GPRS Network Timing

AT+CIPDPDP Set Whether to Check State of GPRS Network Timing
Test Command Response
AT+CIPDPDP=? +CIPDPDP: (list of supported<mode>s, list of supported <interval>, list
of supported <timer>)
OK
Parameters
See Write Command
Read Command Response
AT+CIPDPDP? +CIPDPDP: <mode>,<interval>,<timer>
OK
Parameters
See Write Command
Write Command Response
AT+CIPDPDP=< OK
mode>[,<interval ERROR
>,<timer>]
Parameters
<mode>
<interval>
<timer>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
If "+PDP: DEACT" urc is reported because of module not attaching to gprs
for a certain time or other reasons, user still needs to execute
"AT+CIPSHUT" command makes PDP context come back to original state.
SIM7000 Series_AT Command Manual_V1.03
0 Not set detect PDP
1 Set detect PDP
1<=interval<=180(s), default value is 10.
1<=timer<=10, default value is 3.
141
Smart Machine Smart Decision
2018-05-08