At+Crsm Restricted Sim Access - SimCom SIM7000 Series At Command Manual

<netact>
Unsolicited Result Code
If <n>=1 and there is a change in the MT network registration status
+CREG: <stat>
If <n>=2 and there is a change in the MT network registration status or a
change of the network cell:
+CREG: <stat>[,<lac>,<ci>,<netact>]
Parameters
See Write Command
Parameter Saving -
Mode
Max Response -
Time
Reference Note
3GPP TS 27.007
[13]

3.2.15 AT+CRSM Restricted SIM Access

AT+CRSM Restricted SIM Access
Test Command Response
AT+CRSM=? OK
Write Command Response
AT+CRSM=<Co +CRSM: <sw1>,<sw2>[,<response>]
mmand>[,<fileId
>[,<P1>,<P2>,<P OK
3>[,<data>]]] ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<Command>
<fileId> Integer type; this is the identifier for an elementary data file on
SIM. Mandatory for every Command except STATUS
<P1>,<P2>,<P3> Integer type, range 0 – 255
SIM7000 Series_AT Command Manual_V1.03
0 User-specified GSM access technology
176 READ BINARY
178 READ RECORD
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD
242 STATUS
All other values are reserved; refer GSM 11.11.
Parameters to be passed on by the ME to the SIM; refer GSM
11.11.
50
Smart Machine Smart Decision
2018-05-08