At+Cusd Unstructured Supplementary Service Data - SimCom SIM7000 Series At Command Manual

<bcs>
<bcl>
vent
<voltage>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
3GPP TS 27.007
[13]

3.2.23 AT+CUSD Unstructured Supplementary Service Data

AT+CUSD Unstructured Supplementary Service Data
Test Command Response
+CUSD: (list of supported <n>s)
AT+CUSD=?
OK
Parameters
See Write Command
Read Command Response
AT+CUSD? +CUSD: <n>
OK
Parameters
See Write Command
Write Command Response
AT+CUSD=<n>, OK
If error is related to ME functionality:
<str>,<dcs>
+CME ERROR: <err>
Parameters
<n> A numeric parameter which indicates control of the unstructured
supplementary service data
<str>
USSD-string
SIM7000 Series_AT Command Manual_V1.03
Charge status
0 ME is not charging
1 ME is charging
2 Charging has finished
Battery connection level
1...100 battery has 1-100 percent of capacity remaining
Battery voltage(mV)
0 disable the result code presentation in the TE
1 enable the result code presentation in the TE
2 cancel session (not applicable to read Command response)
String type (string should be included in quotation marks)
57
Smart Machine Smart Decision
2018-05-08