At+Crrcstate Query Rrc State - SimCom SIM7000 Series At Command Manual

Parameter Saving -
Mode
Max Response -
Time
Reference Note


5.2.29 AT+CRRCSTATE Query RRC State

AT+CRRCSTATE Query RRC State
Test Command Response
AT+CRRCSTAT +CRRCSTATE: (list of supported <n>s)
E=?
OK
Read Command Response
AT+CRRCSTAT +CRRCSTATE: <n>,<state>
E?
OK
Parameters
See Write Command
Write Command Response
AT+CRRCSTAT OK
If failed:
E=<n>
+CME ERROR: <err>
Parameters
<n>
<state> Integer type,indicates RRC connection state
Parameter Saving -
Mode
Max Response -
Time
SIM7000 Series_AT Command Manual_V1.03
network,if module has registered to the network successfull
y,it will get an APN from base station delivering.
0 Automatic mode.Applications(AT+CSTT and AT+SAPBR) do
not need to config APN,it will use the APN from base station
delivering.
1 Manual mode,Applications(AT+CSTT,AT+SAPBR) need to
config APN,these APNs can get from operators.
If module are using in GPRS network,you must config <mode> to 1
Integer type
0 Disable unsolicited result code
1 Enable unsolicited result code "+CRRCSTATE: <state>"
0 Idle
1 Connected
255 Other
Smart Machine Smart Decision
104 2018-05-08