At+Cgnsmod Gnss Work Mode Set - SimCom SIM7000 Series At Command Manual

15.2.8 AT+CGNSMOD GNSS Work Mode Set

AT+CGNSMOD GNSS Work Mode Set
Test Command Response
AT+CGNSMOD +CGNSMOD: (list of supported <gps mode>),( list of supported <glo
=? mode>s),( list of supported <bd mode>s),( list of supported <gal mode>s)
OK
Parameters
See Write Command
Read Command Response
AT+CGNSMOD +CGNSMOD: <gps mode>,<glo mode>,<bd mode>,<gal mode>
?
OK
Write Command Response
AT+CGNSMOD OK
=<gps If error is related to ME functionality:
mode>,<glo +CME ERROR: <err>
mode>,<bd
Parameters
mode>,<gal
<GPS mode>
mode>
<glo mode>
<bd mode>
<ga mode>
Parameter Saving AUTO_SAVE_REBOOT
Mode
Max Response -
Time
Reference Note
SIM7000 Series_AT Command Manual_V1.03
GPS work mode
1 Start GPS NMEA out
GLONASS work mode
0 Stop GLONASS NMEA out
1 Start GLONASS NMEA out
BEIDOU work mode
0 Stop BEIDOU NMEA out
1 Start BEIDOU NMEA out
2 BEIDOU outside of us
GALILEAN work mode
0 Stop GALILEAN NMEA out
1 Start GALILEAN NMEA out
2 GALILEAN out side of us
211
Smart Machine Smart Decision
2018-05-08