Mode
Max
Response
-
Time
Reference
Note
Default value of parameter <mode> is different among SIM7000 series
project.
5.2.20 AT+CPSMS Power Saving Mode Setting
AT+CPSMS Power Saving Mode Setting
Test Command
Response
AT+CPSMS=?
+CPSMS:
<Requested_Periodic-RAU>s),(list
<Requested_GPRS-READY-timer>s),(list
<Requested_Periodic-TAU>s),(list
<Requested_Active-Time>s)
OK
Read Command
Response
AT+CPSMS?
+CPSMS: <mode>,[<Requested_Periodic-RAU>],[<Requested_GPRS-
READY-timer>],[<Requested_Periodic-TAU>],[<Requested_Active-Ti
me>]
OK
Parameters
See Write Command
Write Command
Response
AT+CPSMS=[<
OK
mode>[,<Reques
If failed:
ted_Periodic-RA
+CME ERROR: <err>
U>[,<Requested_
Parameters
GPRS-READY-ti
<mode>
mer>[,<Requeste
d_Periodic-TAU
>[,<Requested_A
<Requested_Periodic-RAU> Not supported
ctive-Time>]]]]]
<Requested_GPRS-READY-timer> Not supported
<Requested_Periodic-TAU>
SIM7000 Series_AT Command Manual_V1.03
(list
of
supported
0 Disable the use of PSM
1 Enable the use of PSM
String type; one byte in an 8 bit format. Requested extended periodic
TAU value (T3412) to be allocated to the UE in E-UTRAN. The
requested extended periodic TAU value is coded as one byte
(octet 3) of the GPRS Timer 3 information element coded as bit
format (e.g. "01000111" equals 70 hours). For the coding and the
value range, see the GPRS Timer 3 IE in 3GPP TS 24.008 [8]
96
Smart Machine Smart Decision
<mode>s),(list
of
of
of
of
supported
supported
supported
supported
2018-05-08
Need help?
Do you have a question about the SIM7000 Series and is the answer not in the manual?