At+Cipmode Select Tcpip Application Mode; At+Cipccfg Configure Transparent Transfer Mode - SimCom SIM7000 Series At Command Manual

8.2.23 AT+CIPMODE Select TCPIP Application Mode

AT+CIPMODE Select TCPIP Application Mode
Test Command Response
AT+CIPMODE= +CIPMODE: (0-NORMAL MODE,1-TRANSPARENT MODE)
?
OK
Parameters
See Write Command
Read Command Response
AT+CIPMODE? +CIPMODE: <mode>
OK
Parameters
See Write Command
Write Command Response
AT+CIPMODE= OK
<mode> ERROR
Parameters
<mode>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note

8.2.24 AT+CIPCCFG Configure Transparent Transfer Mode

AT+CIPCCFG Configure Transparent Transfer Mode
Test Command Response
AT+CIPCCFG= +CIPCCFG:
? (NmRetry:3-8),(WaitTm:1-10),(SendSz:1-1460),(esc:0,1) ,(Rxmode:0,1),
(RxSize:50-1460),(Rxtimer:20-1000)
OK
Parameters
See Write Command
Read Command Response
AT+CIPCCFG? +CIPCCFG:
<NmRetry>,<WaitTm>,<SendSz>,<esc>,<Rxmode>,<RxSize>,<Rxtime
r>
SIM7000 Series_AT Command Manual_V1.03
0 Normal mode
1 Transparent mode
142
Smart Machine Smart Decision
2018-05-08