At Commands For Ip Application; Overview; Detailed Descriptions Of Commands; At+Sapbr Bearer Settings For Applications Based On Ip - SimCom SIM7000 Series At Command Manual

7 AT Commands for IP Application

7.1 Overview

Command Description
AT+SAPBR Bearer settings for applications based on IP

7.2 Detailed Descriptions of Commands

7.2.1

AT+SAPBR Bearer Settings for Applications Based on IP

AT+SAPBR Bearer Settings for Applications Based on IP
Test Command Response
AT+SAPBR=? +SAPBR: (0-4),(1-3), "ConParamTag","ConParamValue"
OK
Parameters
See Write Command
Write Command Response
AT+SAPBR=<c OK
md_type>,<cid>[
,<ConParamTag If <cmd_type>=2
>,<ConParamVa +SAPBR: <cid>,<Status>,<IP_Addr>
lue>] OK
If <cmd_type>=4
+SAPBR:
<ConParamTag>,<ConParamValue>
OK
Unsolicited Result Code
+SAPBR <cid>: DEACT
Parameters
<cmd_type>
<cid>
<Status>
SIM7000 Series_AT Command Manual_V1.03
0 Close bearer
1 Open bearer
2 Query bearer
3 Set bearer parameters
4 Get bearer parameters
Bearer profile identifier
119
Smart Machine Smart Decision
2018-05-08