At+Cipsgtxt Select Gprs Pdp Context - SimCom SIM7000 Series At Command Manual

Parameters
See Write Command
Write Command Response
AT+CIPRDTIM OK
ER=<rdsigtimer If error is related to ME functionality:
>,<rdmuxtimer> +CME ERROR: <err>
Parameters
<rdsigtimer> Remote delay timer of single connection. Default value is
<rdmuxtimer> Remote delay timer of multi-connections. Default value is
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
This command is used to shorten the disconnect time locally when the
remote server has been disconnected.

8.2.29 AT+CIPSGTXT Select GPRS PDP context

AT+CIPSGTXT Select GPRS PDP context
Test Command Response
AT+CIPSGTXT +CIPSGTXT: (0,1)
=?
OK
Parameters
See Write Command
Write Command Response
AT+CIPSGTXT OK
=<mode> If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<mode> 0 Select first PDP context
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
This command is used to select pdp context, only for multi IP connection
(+CIPMUX=1).
SIM7000 Series_AT Command Manual_V1.03
2000.
3500.
1 Select second PDP context
148
Smart Machine Smart Decision
2018-05-08