At+Ftpdele Delete Specified File In Ftp Server; At+Ftpsize Get The Size Of Specified File In Ftp Server - SimCom SIM7000 Series At Command Manual

Time
Reference Note
When
"AT+FTPPUT=2, <reqlength>" to write data.

11.2.16 AT+FTPDELE Delete Specified File in FTP Server

AT+FTPDELE Delete Specified File in FTP Server
Test Command Response
AT+FTPDELE=? OK
Parameters
See Execution Command
Execution Response
Command If successed:
AT+FTPDELE OK
+FTPDELE: 1,0
If failed:
OK
+FTPDELE: 1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<error>
Parameter Saving NO_SAVE
Mode
Max Response 75 seconds(In case no response is received from server)
Time
Reference Note
The file to be deleted is specified by the "AT+FTPGETNAME" and
"AT+FTPGETPATH" commands.

11.2.17 AT+FTPSIZE Get the Size of Specified File in FTP Server

AT+FTPSIZE Get the Size of Specified File in FTP Server
Test Command Response
AT+FTPSIZE=? OK
SIM7000 Series_AT Command Manual_V1.03
"+FTPPUT: 1,1,<maxlength>"
See "AT+FTPGET"
178
Smart Machine Smart Decision
is shown, then
2018-05-08
use