At+Cmgr Read Sms Message - SimCom SIM7000 Series At Command Manual

TP data unit into two IRA character long hexadecimal number (e.g. octet
with integer value 42 is presented to TE as two characters 2A (IRA 50 and
65)). In the case of CBS: GSM 03.41 TPDU in hexadecimal format.
<scts>
format (refer <dt>)
<toda>
in integer format (when first character of <da> is + (IRA 43) default is 145,
otherwise default is 129)
<tooa>
integer format (default refer<toda>)
Execution 1) If text mode:
Command the same as AT+CMGL="REC UNREAD",
AT+CMGL
2) If PDU mode:
the same as AT+CMGL=0, received unread messages
See more messages please refer to Write Command.
Parameters
See Write Command
Parameter Saving NO_SAVE
Mode
Max Response 20s(list 50 messages)
Time 20s(list 150 messages)
Reference Note
3GPP TS 27.005
4.2.4

AT+CMGR Read SMS Message

AT+CMGR Read SMS Message
Test Command Response
AT+CMGR=? OK
Write Command Parameters
AT+CMGR=<in <index>
dex>[,<mode>] by the associated memory
<mode>
Response
TA returns SMS message with location value <index> from message
storage <mem1> to the TE. If status of the message is 'received unread',
status in the storage changes to 'received read'.
1) If text mode (+CMGF=1) and Command successful:
for SMS-DELIVER:
+CMGR: <stat>,<oa>[,<alpha>],<scts>[,<tooa>,<fo>,<pid>,<dcs>
SIM7000 Series_AT Command Manual_V1.03
GSM 03.40 TP-Service-Center-Time-Stamp in time-string
GSM 04.11 TP-Destination-Address Type-of-Address octet
GSM 04.11 TP-Originating-Address Type-of-Address octet in
Integer type; value in the range of location numbers supported
0 Normal
1 Not change status of the specified SMS record
64
Smart Machine Smart Decision
received unread messages
2018-05-08