Detailed Descriptions Of Commands; At+Cgnspwr Gnss Power Control - SimCom SIM7000 Series At Command Manual

15.2

Detailed Descriptions of Commands

15.2.1 AT+CGNSPWR GNSS Power Control

AT+CGNSPWR GNSS Power Control
Test Command Response
AT+CGNSPWR +CGNSPWR: (list of supported <mode>s )
=?
OK
Parameters
See Write Command
Read Command Response
TA returns the current status of GNSS Power supply
AT+CGNSPWR?
+CGNSPWR: <mode>
OK
Parameters
See Write Command
Write Command Response
AT+CGNSPWR OK
=<mode> or
ERROR
Parameters
<mode>
0 Turn off GNSS power supply
1 Turn on GNSS power supply
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference NMEA data will not out put to usb's NMEA port when set
AT+CGNSPWR=1
AT+CGNSCFG=1.
15.2.2 AT+CGNSINF GNSS Navigation Information Parsed From NMEA Sentences
AT+CGNSINF GNSS Navigation Information Parsed From NMEA Sentences
Test Command Response
AT+CGNSINF=? OK
Parameters
See Execution Command
Execution Response
Command
+CGNSINF: <GNSS run status>,<Fix status>,<UTC date & Time>,
SIM7000 Series_AT Command Manual_V1.03
through uart port
205
Smart Machine Smart Decision
except config it
2018-05-08
by