SimCom SIM7000 Series At Command Manual page 115

See Write Command
Write Command Response
AT+CGPADDR= +CGPADDR: <cid>,<PDP_addr>
<cid>[,<cid>[,...] [<CR><LF>+CGPADDR: <cid>,<PDP_addr>[...]]
]
OK
or
ERROR
Parameters
<cid>
<PDP_addr> String type, IP address
<PDP_addr_IPV4>
<PDP_addr_IPV6>
Execution Response
Command [+CGPADDR: <cid>,<PDP_addr>] +CGPADDR:
AT+CGPADDR <cid>,<PDP_addr>[...]]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
If SIM card supports IPV4V6 type and the PDP_type of the command
"AT+CGDCONT" defined is ipv4v6 :
[+CGPADDR: <cid>,<PDP_addr_IPV4>,<PDP_addr_IPV6>]
+CGPADDR: <cid>,<PDP_addr_IPV4>,<PDP_addr_IPV6> [...]]]
OK
Parameters
See Write Command
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
SIM7000 Series_AT Command Manual_V1.03
A numeric parameter which specifies a particular PDP context
definition (see +CGDCONT Command)
1...24
Format: "<n>.<n>.<n>.<n>" where <n>=0..255
A string parameter that identifies the MT in the address space
applicable to the PDP.
A string parameter that identifies the MT in the address space
applicable to the PDP when the sim_card supports ipv6.
The pdp type must be set to "ipv6" or "ipv4v6" by the
AT+CGDCONT command.
115
Smart Machine Smart Decision
2018-05-08