At+Ftpmdtm Get The Last Modification Timestamp Of Specified File On The Remote Machine - SimCom SIM7000 Series At Command Manual

11.2.28 AT+FTPMDTM Get the Last Modification Timestamp of Specified File on the
Remote Machine
AT+FTPMDTM Get the Last Modification Timestamp of Specified File on the Remote
Machine
Test Command Response
AT+FTPMDTM= OK
?
Parameters
See Execution Command
Execution Response
Command If success:
AT+FTPMDTM OK
+FTPMDTM: 1,0,<timestamp>
If failed:
OK
+FTPMDTM: 1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<error>
<timestamp> The last modification timestamp of the specified file.
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
The
"AT+FTPGETPATH" commands.
SIM7000 Series_AT Command Manual_V1.03
See "AT+FTPGET"
file is specified
188
Smart Machine Smart Decision
by the "AT+FTPGETNAME" and
2018-05-08