At Commands For Http Application; Overview; Detailed Descriptions Of Commands; At+Httpinit Initialize Http Service - SimCom SIM7000 Series At Command Manual

9 AT Commands for HTTP Application

SIM7000 series has an embedded TCP/IP stack that is driven by AT commands and enables the
host application to easily access the Internet HTTP service. This chapter is a reference guide to
all the AT commands and responses defined to use with the TCP/IP stack in HTTP Service.

9.1 Overview

Command
AT+HTTPINIT
AT+HTTPTERM
AT+HTTPPARA
AT+HTTPDATA
AT+HTTPACTION
AT+HTTPREAD
AT+HTTPSTATUS
AT+HTTPHEAD
AT+HTTPTOFS

9.2 Detailed Descriptions of Commands

9.2.1

AT+HTTPINIT Initialize HTTP Service

AT+HTTPINIT Initialize HTTP Service
Test Command Response
AT+HTTPINIT= OK
?
Execution Response
Command
OK
If error is related to ME functionality:
AT+HTTPINIT
+CME ERROR: <err>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
HTTPINIT should first be executed to initialize the HTTP service.
SIM7000 Series_AT Command Manual_V1.03
Description
Initialize HTTP service
Terminate HTTP service
Set HTTP parameters value
Input HTTP data
HTTP method action
Read the HTTP server response
Read HTTP status
Read the HTTP header information of server response
Download file to ap file system
Smart Machine Smart Decision
152 2018-05-08