At+Ftptype Set The Type Of Data To Be Transferred - SimCom SIM7000 Series At Command Manual

Write Command Response
AT+FTPMODE OK
=<value> If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<value>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note

11.2.3 AT+FTPTYPE Set the Type of Data to Be Transferred

AT+FTPTYPE Set the Type of Data to Be Transferred
Test Command Response
AT+FTPTYPE= OK
?
Read Command Response
AT+FTPTYPE? +FTPTYPE: <value>
OK
Parameters
See Write Command
Write Command Response
AT+FTPTYPE= OK
<value> If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<value>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
When this value is set to A, all the data sent by the stack to the FTP server is
made of 7 bits characters (NVT-ASCII: the MSB is set to 0). As a
consequence binary data containing 8 bits characters will be corrupted
SIM7000 Series_AT Command Manual_V1.03
0 Active FTP mode
1 Passive FTP mode
"A" For FTP ASCII sessions
"I" For FTP Binary sessions
168
Smart Machine Smart Decision
2018-05-08