At+Cfgri Indicate Ri When Using Urc; At+Clts Get Local Timestamp - SimCom SIM7000 Series At Command Manual

Max Response 2s
Time
Reference Note
5.2.3

AT+CFGRI Indicate RI When Using URC

AT+CFGRI Indicate RI When Using URC
Test Command Response
AT+CFGRI=? +CFGRI: (0-2)
OK
Parameters
See Write Command
Read Command Response
AT+CFGRI? +CFGRI: <status>
OK
Parameters
See Write Command
Write Command Response
AT+CFGRI=<st OK
atus> ERROR
Parameters
<status>
Parameter Saving -
Mode
Max Response -
Time
Reference Note

5.2.4

AT+CLTS Get Local Timestamp

AT+CLTS Get Local Timestamp
Test Command Response
AT+CLTS=? +CLTS: "yy/MM/dd,hh:mm:ss+/-zz"
OK
SIM7000 Series_AT Command Manual_V1.03
0 Off
1 On(TCPIP, FTP and URC control RI pin)
2 On(only TCPIP control RI pin)
RI pin can not controll by "AT+CFGRI" command when module has
call service or receiving SMS.
Smart Machine Smart Decision
82 2018-05-08