At+Ciprxget Get Data From Network Manually - SimCom SIM7000 Series At Command Manual

+CIPUDPMODE: 0,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 1,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 2,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 3,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 4,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 5,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 6,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 7,<mode>[,<IP address>,<Port>]
OK
Parameter
See Write Command
Write Command Response
1) For single IP
OK
connection
ERROR
(+CIPMUX=0)
<n>
AT+CIPUDPMOD
number
E=<mode>[,<IP
<mode>
address>,<Port>]
2) For multi IP
connection
<IP address> A string parameter which indicates remote IP address
(+CIPMUX=1)
<port>
AT+CIPUDPMOD
E=<n>,<mode>[,<I
P
address>,<Port>]
Parameter Saving NO_SAVE
Mode
Max Response Time -
Reference Note

8.2.27 AT+CIPRXGET Get Data from Network Manually

AT+CIPRXGET Get Data from Network Manually
Test Command Response
AT+CIPRXGET If single IP connection (+CIPMUX=0)
=? +CIPRXGET: (list of supported <mode>s),(list of supported <reqlength>)
OK
If multi IP connection (+CIPMUX=1)
+CIPRXGET: (list of supported <mode>s), (list of supported <id>s), (list
of supported <reqlength>)
SIM7000 Series_AT Command Manual_V1.03
0-7 A numeric parameter which indicates the connection
0 UDP Normal Mode
1 UDP Extended Mode
2 Set UDP address to be sent
Remote port
145
Smart Machine Smart Decision
2018-05-08