At+Cmgw Write Sms Message To Memory - SimCom SIM7000 Series At Command Manual

given reference value <mr> is returned to the TE on successful message delivery.
<ctrl-Z/ESC> Optionally (when +CSMS <service> value is 1 and network supports)
<scts> is returned. Values can be used to identify message upon unsolicited
delivery status report result code.
1) If text mode(+CMGF=1) and sending successful:
+CMGS: <mr>
OK
2) If PDU mode(+CMGF=0) and sending successful:
+CMGS: <mr>
OK
3)If error is related to ME functionality:
+CMS ERROR: <err>
Parameter
<mr>
Parameter Saving NO_SAVE
Mode
Max Response 60s
Time
Reference Note

3GPP TS 27.005
4.2.6

AT+CMGW Write SMS Message to Memory

AT+CMGW Write SMS Message to Memory
Test Command Response
AT+CMGW=? OK
Write Command Response
1) If text mode TA transmits SMS message (either SMS-DELIVER or SMS-SUBMIT)
(+CMGF=1): from TE to memory storage <mem2>. Memory location <index> of the
AT+CMGW=<o stored message is returned. By default message status will be set to 'stored
a/da>[,<tooa/tod unsent', but parameter <stat> allows also other status values to be given.
a>][,<stat>]
<CR> text is If writing is successful:
entered +CMGW: <index>
<ctrl-Z/ESC>
<ESC> quits OK
without sending If error is related to ME functionality:
+CMS ERROR: <err>
2) If PDU mode
Parameters
(+CMGF=0):
<oa>
AT+CMGW=<le
string format(string should be included in quotation marks); BCD numbers
SIM7000 Series_AT Command Manual_V1.03
GSM 03.40 TP-Message-Reference in integer format
Reject incoming call when sending messages.
GSM 03.40 TP-Originating-Address Address-Value field in
Smart Machine Smart Decision
68 2018-05-08