At Commands For Ftp Application; Overview - SimCom SIM7000 Series At Command Manual

11 AT Commands for FTP Application

SIM7000 series has an embedded TCP/IP stack that is driven by AT commands and enables the
host application to easily access the Internet FTP service. This chapter is a reference guide to all
the AT commands and responses defined for using with the TCP/IP stack in FTP Service.
11.1

Overview

Command
AT+FTPPORT
AT+FTPMODE
AT+FTPTYPE
AT+FTPPUTOPT
AT+FTPCID
AT+FTPREST
AT+FTPSERV
AT+FTPUN
AT+FTPPW
AT+FTPGETNAME
AT+FTPGETPATH
AT+FTPPUTNAME
AT+FTPPUTPATH
AT+FTPGET
AT+FTPPUT
AT+FTPDELE
AT+FTPSIZE
AT+FTPSTATE
AT+FTPEXTPUT
AT+FTPMKD
AT+FTPRMD
AT+FTPLIST
AT+FTPEXTGET
AT+FTPETPUT
AT+FTPETGET
AT+FTPQUIT
AT+FTPRENAME
AT+FTPMDTM
SIM7000 Series_AT Command Manual_V1.03
Description
Set FTP control port
Set active or passive FTP mode
Set the type of data to be transferred
Set FTP put type
Set FTP bearer profile identifier
Set resume broken download
Set FTP server address
Set FTP user name
Set FTP password
Set download file name
Set download file path
Set upload file name
Set upload file path
Download file
Set upload file
Delete specified file in FTP server
Get the size of specified file in FTP server
Get the FTP state
Extend upload file
Make directory on the remote machine
Remove directory on the remote machine
List contents of directory on the remote machine
Extend download file
Upload File
Download File
Quit current FTP session
Rename the Specified File on the Remote Machine
Get the Last Modification Timestamp of Specified File on the Remote
Machine
Smart Machine Smart Decision
166 2018-05-08