At+Cipqsend Select Data Transmitting Mode; At+Cipack Query Previous Connection Data Transmitting State - SimCom SIM7000 Series At Command Manual

8.2.4

AT+CIPQSEND Select Data Transmitting Mode

AT+CIPQSEND Select Data Transmitting Mode
Test Command Response
AT+CIPQSEND +CIPQSEND: (0,1)
=?
OK
Parameters
See Write Command
Read Command Response
AT+CIPQSEND +CIPQSEND: <n>
?
OK
Parameter
See Write Command
Write Command Response
AT+CIPQSEND OK
=<n>
Parameters
<n>
responsd SEND OK.
responsd DATA ACCEPT: <n>,<length>, while not responding SEND OK.
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
8.2.5

AT+CIPACK Query Previous Connection Data Transmitting State

AT+CIPACK Query Previous Connection Data Transmitting State
Test Command Response
AT+CIPACK=? OK
Write Command Response
If in multi IP +CIPACK: <txlen>,<acklen>,<nacklen>
connection
(+CIPMUX=1) OK
AT+CIPACK=<
Parameters
n>
<n>
<txlen>
<acklen>
<nacklen> The data amount without confirmation by the server
SIM7000 Series_AT Command Manual_V1.03
0 Normal mode – when the server receives TCP data, it will
1 Quick send mode – when the data is sent to module, it will
A numeric parameter which indicates the connection number
The data amount which has been sent
The data amount confirmed successfully by the server
127
Smart Machine Smart Decision
2018-05-08