At+Cedump Set Whether The Module Reset When The Module Is Crashed - SimCom SIM7000 Series At Command Manual

Parameters
See Write Command
Write Command Response
AT+CNACT=<m OK
ode>[,<apn>] If failed:
+CME ERROR: <err>
Parameters
<mode>
<apn>
<status>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
"+APP PDP: ACTIVE" will be reported if the app network actived,and
"+APP PDP: DEACTIVE" will be reported if the app network deactived.
Auto Active means the will active automatically if the activation failed.

5.2.32 AT+CEDUMP Set whether the module reset when the module is crashed

AT+CEDUMP Set whether the module reset when the module is crashed
Read Command Response
AT+CEDUMP? +CEDUMP: <mode>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command
Write Command Response
AT+CEDUMP OK
=<mode> If error is related to ME functionality:
SIM7000 Series_AT Command Manual_V1.03
0 Deactive
1 Active
2 Auto Active
(Access Point Name) A string parameter (string should be included
in quotation marks) which is a logical name that is used to select the
GGSN or the external packet data network. If the value is null or
omitted, then the subscription value will be requested.The default
value is NULL.
0 Deactived
1 Actived
106
Smart Machine Smart Decision
2018-05-08