At+Cedrxs Entended-Drx Setting - SimCom SIM7000 Series At Command Manual

<Requested_Active-Time>
Parameter Saving AUTO_SAVE
Mode
Max Response -
Time
Reference Note

5.2.21 AT+CEDRXS Entended-DRX Setting

AT+CEDRXS Entended-DRX Setting
Test Command Response
AT+CEDRXS=? +CEDRXS:
<n>s),<AcT-type>,<Requested_eDRX_value>
OK
Read Command Response
AT+CEDRXS? +CEDRXS: <AcT-type>,<Requested_eDRX_value>
OK
Parameters
See Write Command
Write Command Response
AT+CEDRXS=< OK
n>,<AcT-type>,< If failed:
Requested_eDR +CME ERROR: <err>
X_value>
Parameters
<n>
SIM7000 Series_AT Command Manual_V1.03
Table 10.5.163a/3GPP TS 24.008. See also 3GPP TS 23.682 [149]
and 3GPP TS 23.401 [82]. The default value, if available, is
manufacturer specific.
String type; one byte in an 8 bit format. Requested Active Time
value (T3324) to be allocated to the UE. The requested Active Time
value is coded as one byte (octet 3) of the GPRS Timer 2
information element coded as bit format (e.g. "00100100" equals 4
minutes). For the coding and the value range, see the GPRS Timer 2
IE in 3GPP TS 24.008 [8] Table 10.5.163/3GPP TS 24.008. See also
3GPP TS 23.682 [149],
3GPP TS 23.401 [82].
manufacturer specific.
(list
0 Disable the use of eDRX
1 Enable the use of eDRX
2 Enable the use of eDRX and auto report
3 Disable the use of eDRX(Reserved)
97
Smart Machine Smart Decision
3GPP TS 23.060 [47]
The default value,
of
and
if available, is
supported
2018-05-08