At+Casslcfg Set Ssl Certificate And Timeout Parameters - SimCom SIM7000 Series At Command Manual

Max Response -
Time
Reference Note

18.2.3 AT+CASSLCFG Set SSL certificate and timeout parameters

AT+CASSLCFG Set SSL certificate and timeout parameters
Test Command Response
AT+CASSLCFG= +CASSLCFG: (range of supported <cid>s),"cacert",<caname>
+CASSLCFG: (range of supported <cid>s),"clientcert",<certname>
?
+CASSLCFG: (range of supported <cid>s),"psktable",<pskname>
+CASSLCFG: (range of supported <cid>s),"timeout",(0-65535)
OK
Parameters
See Write Command
Read Command Response
AT+CASSLCFG? If <cid> has been set by AT+CACID:
+CACID: <cid>
cacert: <caname>
clientcert: <certname>
psktable: <pskname>
timeout: <timeout>
OK
If no <cid> has been set by AT+CACID:
OK
Parameter
See Write Command
Write Command Response
AT+CASSLCFG= OK
<cid>,"cacert",<c If error is related to ME functionality:
aname> +CME ERROR: <err>
Parameters
<cid>
<caname> Alphanumeric ASCII text string up to 64 characters. Root
certificate name that has been configured by AT+CSSLCFG.
Note: If the root certificate is empty, module will trust all certificates as
default.
AT+CASSLCFG= Response
<cid>,"clientcert", OK
SIM7000 Series_AT Command Manual_V1.03
TCP/UDP identifier, see AT+CACID
231
Smart Machine Smart Decision
2018-05-08