Atl Set Monitor Speaker Loudness; Atm Set Monitor Speaker Mode; Switch From Data Mode Or Ppp Online Mode To Command Mode - SimCom SIM7000 Series At Command Manual

2.2.6

ATL Set Monitor speaker loudness

ATL Set Monitor speaker loudness
Execution Response
Command OK
ATL<value>
Parameters
<value>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
V.25ter No effect in GSM
2.2.7

ATM Set Monitor Speaker Mode

ATM Set Monitor Speaker Mode
Execution Response
Command OK
ATM<value>
Parameters
<value>
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
V.25ter No effect in GSM
2.2.8

+++ Switch from Data Mode or PPP Online Mode to Command Mode

+++ Switch from Data Mode or PPP Online Mode to Command Mode
Execution Response
Command The +++ character sequence causes the TA to cancel the data flow over the
+++ AT interface and switch to Command mode. This allows you to enter AT
Command while maintaining the data connection to the remote server.
OK
To prevent the +++ escape sequence from being misinterpreted as data, it
should comply to following sequence:
No characters entered for T1 time (1 second)
"+++" characters entered with no characters in between (1 second)
No characters entered for T1 timer (1 second)
Switch to Command mode, otherwise go to step 1.
SIM7000 Series_AT Command Manual_V1.03
0..3 Volume
0..2 Mode
21
Smart Machine Smart Decision
2018-05-08