At Commands For Tcpip Application Toolkit; Overview - SimCom SIM7000 Series At Command Manual

8 AT Commands for TCPIP Application Toolkit

8.1 Overview

Command
AT+CIPMUX
AT+CIPSTART
AT+CIPSEND
AT+CIPQSEND
AT+CIPACK
AT+CIPCLOSE
AT+CIPSHUT
AT+CLPORT
AT+CSTT
AT+CIICR
AT+CIFSR
AT+CIFSREX
AT+CIPSTATUS
AT+CDNSCFG
AT+CDNSGIP
AT+CIPHEAD
AT+CIPATS
AT+CIPSPRT
AT+CIPSERVER
AT+CIPCSGP
AT+CIPSRIP
AT+CIPDPDP
AT+CIPMODE
AT+CIPCCFG
AT+CIPSHOWTP
AT+CIPUDPMODE
AT+CIPRXGET
AT+CIPRDTIMER
SIM7000 Series_AT Command Manual_V1.03
Description
Start up multi-IP connection
Start up TCP or UDP connection
Send data through TCP or UDP connection
Select data transmitting mode
Query previous connection data transmitting state
Close TCP or UDP connection
Deactivate GPRS PDP context
Set local port
Start task and set APN, user name, password
Bring up wireless connection with GPRS
Get local IP address
Get Local IP Address extend
Query current connection status
Configure domain name server
Query the IP address of given domain name
Add an IP head at the beginning of a package received
Set auto sending timer
Set prompt of '>' when module sends data
Configure module as server
Set GPRS for connection mode
Show remote IP address and port when received data
Set whether to check state of GPRS network timing
Select TCPIP application mode
Configure transparent transfer mode
Display transfer protocol in IP head when received data
UDP extended mode
Get data from network manually
Set remote delay timer
Smart Machine Smart Decision
121 2018-05-08